Gal. Welded Wire Mesh
Qinghe Gal. Welded Wire Mesh is made of mild steel wire or pre-galvanized steel wire. It is one of the most versatile of industrial wire products and has innumerable applications throughout all types of industry. It is no longer limited to square or rectangular holes, rolls or panels; Qinghe can craft special shapes like 3-dimensional structures by curving or folding the mesh panels.
Assortments according to different manufacturing procedures:
– Hot -dipped galvanized welded wire mesh： Hot dip galvanization after or before welding.
– Electrode galvanized welded wire mesh： electrode galvanization after or before welding.
What’s the differences of above assortments and how to choose?
In deciding which kind of galvanized welded wire to use, take the following into consideration:
- How long do you want the fence or mesh to last?
- How much is your budget?
- What factors determine the mesh size that you want to use?
- Are there environmental factors that could potentially shorten the lifetime of the wire?
- Does your project require a lot of labor that will need to be repeated when the wires rust through and need replacement?
- Will the appearance of rusting wires be objectionable?
|Gal Welded Wire Mesh Assortments Comparison Chart|
|Assortments||If wire is covered by Zinc?||If Welding points iscovered by Zinc?||Corrosion Resistance||Lifetime||Cost|
|Hot dip GalvanizationAfter Welding||YES, very high||YES, very high||High||Long||High|
|Hot dip Galvanization Before Welding||YES,from 50G to 275G/SQM||NO||Normal||Normal||Medium|
|Electrode-Galvanization After Welding||Yes, very low, from 10G to 30G/SQM||YES, very low||Normal||Normal||Medium|
|Electra-Galvanization Before Welding||Yes, very lowfrom 5G to 30grams/SQM||NO||Low||Short||Low|
Hot-dipped Galvanization for welded wire mesh
It is the chemical treatment, belonging to the electrode chemical reaction. Zinc ingots are melted in zinc tank with some auxiliary materials at high temperatures(can be generated by coal, electricity, gas etc), and then the welded wire mesh get a bath in and out, so that a layer of zinc metal components attached on the surface of welded wire mesh. The advantage of his strong anti-corrosion, galvanized layer adhesion and better hardness is not easy to come off, and can be used for a long time. The welded wire mesh need to go through DE-greasing and acid washing before going through the zinc tank.
Electrode Galvanization for welded wire mesh
Electrode-galvanized cold galvanizing uses electrolysis equipment , through the degrease, pickling ingredients post-zinc salt into the solution, and connects the negative terminal of electrolytic device; in the work-piece opposite the place of zinc plate connected to the electrolysis device cathode, connected to power, the use of current from the cathode to the anode of the directional move will be a layer of zinc deposited on the work piece.
Packing & Loading
Packing for Gal/Steel Welded Wire Mesh rolls: Shrink bag, then on the pallets or without pallets
Packing for welded wire mesh panels: Pallets with shrink plastic